D&R AutoChuck Product 2

Compact Arbor Motors

Click on the end mill for www.ekstromcutter.com to learn about Ekstrom-Carlson manufactured high end industrial carbide and high speed steel router bits, end mills, cutters, etc.... Buy direct and save money, typically 30% less than our competition. Send samples with quantity requirements to receive a quotation, or contact us with our part number or a competitors part number and let us do the work for you. First time new customer router bit orders over $500.00 receive an extra 10% off our already low prices.

Visit www.ekstromcarlson.com for spindle motors, spindle repairs, saw motors, arbors, and other machine components.

Ekstrom-Carlson is the exclusive distributor for Fimec® Saw Arbor Motors in North America. The design allows a considerable amount of horsepower in a compact motor. Motors can be mounted vertically. If required, we can supply motors with an oversized bearing at the tool end, or a precision duplex angular contact bearing for higher load capability.
SE Frames, 3 Phase SEM Frames, 1 Phase	from 71 to 100 from 71 to 80
SE Powers, 3 Phase SEM Powers, 1 Phase SAWM Spindle Saw Motors	2 to 20HP 1.3 to 3HP 0.4 to 2.68HP high speed saw motors
Available Speeds	2 Poles (2800 RPM at 50 Hz, 3400 RPM at 60 Hz) 4 Poles (1400 RPM at 50 Hz, 1700 RPM at 60 Hz) To 7200 RPM with Inverter Special SAWM-C54 and SAWM-C73 motors for speeds from 7000 to 24000 RPM, Variable Speed Drive required.
Options	No Brake Pneumatic Brake - Fimec® patented DC Electric Brake Left or Right Hand Threaded Shaft. Special shaft to fit your needs Oversized, or dual angular contact thrust bearing, at tool end Customer Specified Shaft Design for Shaper, Tenoner, Moulders, etc.... Various Terminal Box Locations *Wet Spray Application Protection
Protection	IP54 Standard, IP55 Water Spray Duty Optional. Warranty does not apply for water spray duty unless otherwise advised by D&R AutoChuck. See details on enclosure ratings.
Insulation	F
Service	S3 intermittent periodic duty or S6 continuous operation periodic duty

Ekstrom-Carlson is the exclusive distributor for Fimec® Saw Arbor Motors in North America. These motors offer a high horsepower in a compact size, making it the ideal motor for saw arbor applications . The housing is an extruded light alloy flat housing and the rotor is a pressure aluminum die cast cage design. Motors are balanced with a half key installed on the shaft extension. The stator is wound with Class H copper conductor insulation. Standard bearings are single row deep grooved, shielded for protection, and greased for life. (Exceptions include the SAWM-C54, SAWM-C73 and special arbor motors with duplex angular contact bearings in the front end). See below for approximate dimensions and model numbers. **Stock shaft diameters in the United States are 1.00 Inch for all motors other than SAWM-C54 and SAWM-C73, which are 5/8".. Special shafts, with different lengths or larger diameters, are available in 1-5 weeks.

Arbor Motor Model	Horsepower	Speed (RPM)	Approximate Dimensions	Weight (lb)
SAWM-C54	0.4 to 1.34	7000 - 24000	2.5"x3.2"x9.7" (5/8" dia shaft)	8.8
SAWM-C73	1.0 to 2.68	7000 - 18000	3.2"x3.6"x10.2" (5/8" dia shaft)	11.0
H71a2SE	1.5	3450	5.1” x 5.1” x 14.1”	33.0
H71a2SE*(Stock)	2.4	3450	5.1” x 5.1” x 16.5”	36.4
H71b2SE	3	3450	5.1” x 5.1” x 16.5”	40.8
H71c2SE*(Stock)	3.6	3450	5.1” x 5.1” x 16.5”	46.3
H80Sa2SE	3.6	3450	5.9” x 5.9” x 16.6”	47.4
H80Sb2SE*(Stock)	4.8	3450	5.9” x 5.9” x 16.6”	52.9
H80M2SE*(Stock)	6.6	3450	5.9” x 5.9” x 18.1”	61.7
H80Mc2SE*(Stock)	7.2	3450	5.9” x 5.9” x 18.1”	77.2
H80L2SE*(Stock)	9	3450	5.9” x 5.9” x 19.8”	77.2

H80L2SE SPEC001*(Stock)

3450

Special 1.25" Tool Dia x 5.00" Long Shaft w/RHT

H90S2SE	9	3450	6.5” x 6.5” x 21.1”	88.2
H90L2SE	12	3450	6.5” x 6.5” x 23.8”	101.4
H100S2SE	15	3450	7.4” x 7.4” x 22.6”	132.3
H100L2SE	18	3450	7.4” x 7.4” x 24.6”	149.9
H71a4SE	1.8	1750	5.1” x 5.1” x 16.5”	41.9
H71b4SE	2.4	1750	5.1” x 5.1” x 16.5”	46.3
H80Sa4SE	3	1750	5.9” x 5.9” x 16.6”	50.7
H80Sb4SE	3.6	1750	5.9” x 5.9” x 16.6”	54.0
H80L4SE	4.8	1750	5.9” x 5.9” x 19.8”	58.0
H90S4SE	6.6	1750	6.5” x 6.5” x 21.1”	82.7
H90L4SE	9	1750	6.5” x 6.5” x 23.8”	99.2
H100S4SE	12	1750	7.4” x 7.4” x 22.6”	132.3
Ekstrom-Carlson	15 to 30	1750	Contact us for these special motors

Motors are available in 3 phase (SE) and 1 phase (SEM) design. Single phase motors are equipped with a run capacitor permanently turned on and connected to the auxiliary winding for starting.

Saw motors are typically supplied with a left or right hand threaded shaft, nut and flanges. Other options are available upon request. Lead-times of 1-5 weeks can be accomplished for motors with shaft modifications.

The terminal box can be positioned near the exit shaft (standard on right side), near the fan cover, or on the top of the motor. It can also be rotated in steps of 90° in order to provide cable entry from different directions.

Motors manufactured with a pneumatic brake are equipped, at the rear shield, with a pneumatically operated annular piston working against a spring-loaded friction disk. The benefits of this design include varying brake torque by air pressure adjustment, a constant brake force, long life with no electric brake windings, and a higher braking power than dc electric brakes. An electric valve is required to control air supply to the brake.

Motors manufactured with a dc electric security brake are well suited for cutting safety stops. The brake can be wired separately of directly from the motor terminal box connected to a high quality rectifier.

**Data above may not be applicable to all motors. Contact us for details on your specific need.

[ Home ] [ Up ]